Author: Will Blackwell

What to know The firmware downgrade operation of a panel consists in the installation of a firmware version that is older than the firmware version installed on the operator panel at production time (version reported on the panel informations sticker). This operation even if, in some cases, possible, is not suggested. The reason for this […]

What to know The eTOPxxC series, eTOP300 series and eTOP04C operator panels have an integrated USB port that can be used to programmer the device trough an USB flash drive. Using Designer programming software the application and the firmware files to be used into the unit can be downloaded into the USB flash drive, it […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thinked to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thinked to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safe as possible but […]

What to know Exor Designer serie operator panels uses battery type CR2430 from Renata or equivalent from another producer, it is a 3V 270mA lithium battery, not rechargeable. Such battery model can be easily find into supermarkets or electronic components resellers. NOTE: eTOP04C and eTOP300 serie models uses a rechargeable, non user replaceable battery.