Category: Designer

UniOP is providing the users with the maximum flexibility in the assignment of the IP address. There are several ways to do this and well defined priority rules in order to understand which will be the address used in every situation. The available methods to assign an IP address to a panel are: Manual definition […]

What to know The UniOP Designer operator panels family support the connection with Siemens S5 plc family, using the SimaticS5 communication protocol. The operator panels have a dedicated Current Loop 20 mA interface on the PLC port that allows the direct connection with the PLC. What stated above is valid with some exceptions listed below: […]

What to know The firmware downgrade operation of a panel consists in the installation of a firmware version that is older than the firmware version installed on the operator panel at production time (version reported on the panel informations sticker). This operation even if, in some cases, possible, is not suggested. The reason for this […]

What to know The eTOPxxC series, eTOP300 series and eTOP04C operator panels have an integrated USB port that can be used to programmer the device trough an USB flash drive. Using Designer programming software the application and the firmware files to be used into the unit can be downloaded into the USB flash drive, it […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thought to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thinked to be as safest as possible but […]

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware upgrade operation has been thinked to be as safest as possible but […]