20 Jun

How to configure Enhanced Write Filter (EWF) under Windows OS

What to know Enhanced Write Filter (or EWF) is a component of Windows XP Embedded and Windows Embedded Standard 7 which stores volume changes on another medium instead of applying them to the original volume. EWF allows the writes to be discarded or committed to the original volume later (either directly or through inaction based […]

Read More
20 Jun

Communication between JMobile PC Runtime and Siemens S7-200 devices using Simatic S7-PPI protocol

What to know JMobile PC Runtime can communicate with Siemens Simatic S7-200 PLC family using the Simatic S7-PPI communication protocol. Note: JMobile Suite version 1.91.00.327 or newer is required. The PPI communication is done trough a 485 2 wires connection, for this reason the communication can be established in two ways: Direct trough a 485 […]

Read More
20 Jun

How can I disable IIS or World Wide Web Publishing service in Windows OS?

What to know The Microsoft IIS (Internet Information Services), listen by default on port 80/TCP and on some version of Microsoft Windows like Windows Embedded Standard 7, it’s installed as default. This system service so became in conflict with the default listening service of JMobile PC Runtime. This FAQ explains how to disable the IIS […]

Read More
20 Jun

Communication between JMobile PC Runtime and GE devices using GE SNP protocol

What to know JMobile PC Runtime can communicate with GE PLCs using the GE SNP communication protocol. Note: JMobile Suite version 1.91.00.327 or newer is required. The SNP communication is generally done trough a 422 4 wires connection, for this reason the communication can be established in two ways: Direct trough a 422 port of […]

Read More
20 Jun

How can I configure serial ports on eTOP-EPC, eTOP-IPC and eCC industrial PC

What to know eTOP-EPC, eTOP-IPC and eCC industrial PC have integrated serial port that can be configured into BIOS. This FAQ will drive you through serial ports configuration. What to do to access BIOS Setup When the system is powered on, the BIOS will enter the Power-On Self Test (POST) routines. These routines perform various […]

Read More
20 Jun

How to calibrate touch screen display on Industrial PC and Monitors

What to know For Exor Industrial Computers eTOP-EPC, eTOP-IPC and Industrial Monitors eTOP-MON series, a specific touch calibration utility is available if calibration of the touch screen if required. What to do Launch the PenMount Control Panel clicking on the desktop icon, system try icon or from the Start Menu of windows. The system lists […]

Read More
20 Jun

Why I’m not able to activate JMobile PC Runtime license on industrial PC?

What to know Enhanced Write Filter (or EWF) is a component of Windows XP Embedded and Windows Embedded Standard 7 which stores volume changes on another media instead of applying them to the original volume. If the EWF component is enabled on the industrial PC, after the activation of the JMobile Runtime PC license, the […]

Read More