Category: JMobile

What to know Using eTOP Series HMI you can deliver effective HMI and control solutions based on JMobile and CODESYS V2. eTOP Series HMI products have been designed to include the CODESYS v2 internal PLC. This FAQ will help you on first steps to start working with CODESYS v2 Internal PLC and JMobile Software. What […]

What to know This document is intended to guide a user through the steps of configuring an eTOP panel as a Modbus TCP master communicating with the MPiec controller as a slave using JMobile software. NOTE: The MPiec controllers that can be configured as Modbus slave are MP2600iec and MP2300iec What to do To set […]

What to know The runtime provides the possibility to show on the screen a log of the operations done by the runtime itself; there is also the possibility to save this log to a file and get it via FTP or direclty in a USB memory stick for later reference. What to do 1. Open […]

What to know JMobile Studio 1.90 has JM4Web feature that allow you to create a “web version” of project pages. Almost all web browsers today have cache functionality to speed up internet navigation on pages already visited, this useful feature become a little issue while developing web pages. What to do Every time a new […]

What to know JMobile provides three different levels of security: Project level: User Management At project level you can define your Security Settings from JMobile Studio. Runtime level: Remote Password At runtime level, you can protect upload and download of any project in your panel. OS level: BSP Password At OS level, you can protect […]

What to know JMobile Runtime, starting from version 1.90, contains a new advanced reporting tool for “HMIce.exe” crash that can provide useful informations during debugging. Instead of displaying only an “HMI.exe encountered a serious error” alert, the system now diplays a window that allow user to save a log file. What to do When a […]

What to know JMobile PC Runtime is thinked to bring Exor HMI JMobile runtime to PC Environment. This FAQ will help you on troubleshooting some common issues when downloading JMobile project into PC Runtime. What to do: configure correct ports into “Download to target” > “Advanced…” JMobile PC Runtime, by default, uses ports 80 and […]

What to know The table below shows all ports used by Panel and JMobile Studio for all operations: Ports Usage VNC Client Windows Client ActiveX Client JM4Web Board Management Runtime and Project Management Codesys workbench 80/tcp http port 21/tcp ftp cmd port 2100/tcp board port 16384-17407/tcp ftp data port (passive mode) 990-991/udp Broadcast device discovery […]

What to know The list of the optional modules installed on the panel can be reached from the System Settings rotating menu, by selecting the “Plug-in List” voice. What to do The Plug-in List is available both in System Settings in User mode (reachable from context menu from Runtime) and System Settings in System mode […]

What to know eTOP400/500/600 series operator panels supports FAT and FAT32 filesystems, NTFS filesystem is not supported. The maximum size of an SD card or an USB memory that can be used is, by consequence, limited by the specifics of the FAT32 filesystem: Up to 4 GB for a single file, Up to 32GB for […]